The SMARTBOX power cable connects directly to your car battery to provide continuous power to support the MiVUE Dash Cam parking mode feature after the engine has been turned off. It prevents your car battery from being completely drained of power when not in use and has an auto shut off feature based on a preset time and/or if your car battery voltage drops below a certain rating.
The MiVUE™ Smartbox can be used on the following models that don’t support the parking mode feature - MiVUE630, MiVUE700, MiVUE 730, but will still allow the MiVUE device to continuously record whilst running on the vehicles battery power once the vehicle is powered off.
It is recommended that an Auto Electrician fits the MiVUE SMARTBOX to your vehicle.RRP $79.00
Replacement Y cable for your MiVUE Dual camera Dash Cam.RRP $14.95
Replacement 5M Mivue Dual Camera USB connection cable that connects from your Mivue rear camera to the Y cable, then connected to your Mivue Dash Cam.RRP $14.95
Secure your Navman MiVUE Dash Cam safely with this easy-to-use car cradle. Suitable only for MiVUE 630, 660, 680, 690 Safe, 698 Dual Cam, 700, 730, 780, 800 Dual Cam, 850 Dual CamRRP $39.00
Switching vehicles? The rear camera mount attaches to your vehicles rear window with 3M double sided tape, so you can simply unclip your Mivue rear camera and wiring and install it onto the next vehicle.RRP $14.95
The Navman A20 Rear Camera kit enables 2 Channel Dual Recording for compatible Navman DRIVE DUO Series and Navman MiVUE Dash Cam Series devices. Record high quality video footage with 1080P Full HD and glass lens.RRP $139.00
Secure your Navman MiVUE Dash Cam safely with this 3M self-adhesive car cradle.
Clean the windscreen and ensure it is free from dirt, dust and oils. Position the mount for best optimal position, refer to your MiVUE user manual.
Peel off protective 3M paper and press the adhesive mount firmly against your windscreen for 30 seconds. Leave for 1 hour before installing your MiVUE Dash Cam.
This vehicle power adapter cable simply plugs into the cigarette lighter to deliver optimum power to your MiVUE DDR whilst driving. Rating: 5V/2ARRP $34.95
The Sandisk High Endurance Video Monitoring 64GB microSD card that has been specifically designed and optimised for use in Dash Cameras and loop recording devices. It can withstand up to 10,000 hours of loop recording in your Dash Camera to provide reliable and durable videos. It’s rigorously tested and proven to stand up to shock, water and x-rays to give you the durability you need.RRP $55.00
Stay safe on the road by minimising your risk of a tyre puncture and maintaining the right tyre pressure and temperature with the MiTYRE Tyre Pressure Monitoring System. Improve your vehicle’s fuel consumption, maintain tyre grip and enhance driving comfort.
- Wireless Tyre Pressure Monitoring System for Navman MiVUE Dash Cam.
- Visual display of temperature and tyre pressure.
- Alerts when the tyre pressure or temperature is higher or lower than your preset value.
- Interchangeable lithium battery powered sensor. (Each sensor uses 1 x CR162 Lithium battery)
- Includes a USB signal receiver and 4x external sensors, 4x CR162 Lithium Batteries, 4x anti-theft locking rings, 4xhex socket screws & 1x hex key
Please ensure you have the latest firmware installed for your compatible MiVUE device. Click Here for the list of latest firmware.
- Click Here for the User Manual.RRP $299.00
The Sandisk High Endurance Video Monitoring 32GB microSD card that has been specifically designed and optimised for use in Dash Cameras and loop recording devices. It can withstand up to 10,000 hours of loop recording in your Dash Camera to provide reliable and durable videos. It’s rigorously tested and proven to stand up to shock, water and x-rays to give you the durability you need.RRP $35.00